USB-CIF02

USB-CIF02 Plc Programming Cable

USB-CIF02 programming cable is suitable for Omron PLC and can be directly connected to CPM1, CPM1A, CPM2A, C200HS, C200HX/HG/HE, and SRM1 series PLC. It is also named cqm1-cif02 USB or usb-cqm1-cif02

USB-CIF02 is a programming cable that provides serial connection and peripheral port signal conversion through the USB interface. Under the control of the driver running in the computer, the computer’s USB interface is simulated into a traditional serial port (commonly known as COM port), thus using the existing Application software such as various programming software, communication software, and monitoring software. The working power of this cable is taken from the USB port and is no longer powered by the programming port of the PLC. The two-color LED on the conversion box indicates the status of data transmission and reception.

USB-CIF02 Datasheet

Operating system: WindowsXP/Win7/Win10
Programming software version: CX-Programmer
Fully compatible with USB V2.0 specification
USB bus power supply, current consumption is about 50mA
Baud rate: 300bps ~ 1Mbps standard baud rate automatically adapts
Support UART data format: data bits: 7, 8 stop bits: 1, 2,
Parity: odd/even/no parity
Working temperature: -20 ~ +75 ℃

How To Use USB-CIF02

The USB-CIF02 programming cable needs to install a USB device driver before it can be used. After the driver is installed, the COM port corresponding to the USB-CIF02 programming cable will appear in the Windows Device Manager. Just select the COM port in the programming software or other application software. Other communication parameters use the default settings. The subsequent use is exactly the same as the traditional RS232 interface programming cable.

USB-CIF02 Driver

usb-cif02 driver download for windows xp/10

Leave a Comment