Modbus Ethernet series data acquisition module

The Modbus Ethernet series data acquisition module is a multi-functional serial server. In addition to its own digital acquisition control and analog acquisition output channels, it also adds an RJ45 interface, which enables it to add network connectivity to the MODBUS RTU function used for serial communication. The conversion of the MODBUS TCP protocol communication of the port equipment can also be through the two-way transparent transmission between the RS485 serial port and the Ethernet, so that the equipment with the RS485 interface has the ability to connect to the TCP/IP network. At the same time, 2 independent RS485 serial ports extend a physical communication link. It also supports dialing code to set serial port baud rate, station number, “six in one” MODBUS RTU slave station and other practical functions. It is an economical and stable product.

ETH-MODBUS-IO8R-A
8-channel digital input, 8-channel digital output, 6-channel 12-bit analog input, 1-channel 12-bit analog output, 1-channel RJ45 network port, 2-channel RS485 interface;

ETH-MODBUS-IO16R
16-channel digital input, 16-channel digital output (relay), 1-channel RJ45 network port, 2-channel RS485 interface;

ETH-MODBUS-IO16T
16-channel digital input, 16-channel digital output (transistor), 1-channel RJ45 network port, 2-channel RS485 interface

ETH-MODBUS-O16R
16 digital outputs (relays), 1 RJ45 network port, 2 RS485 ports;

ETH-MODBUS-IO5R
5-channel digital input, 5-channel digital output (relay), 1-channel RJ45 network port, 2-channel RS485 interface

ETH-MODBUS-O32T
32 digital outputs (transistor), 1 RJ45 network port, 2 RS485 ports;

ETH-MODBUS-O32R
32 digital outputs (relays), 1 RJ45 network port, 2 RS485 ports;

ETH-MODBUS-I32
32 digital inputs, 1 RJ45 network port, 2 RS485 ports.

Leave a Comment