AMX-FX3U-26MT-E

Description

The AMX-FX3U-26MT-E is a module that is compatible with the Mitsubishi MELSEC series of programmable logic controllers (PLCs). It is a transistor output plc controller that has two analog inputs, one analog output, 16 digital inputs, and 10 digital outputs. It also supports Ethernet MODBUS communication, which allows it to connect to other devices on a network and exchange data. The AMX-FX3U-26MT-E module is typically used to expand the input and output capabilities of a PLC system and is useful for a wide range of applications where multiple inputs and outputs are required. It is an effective and reliable solution for increasing the functionality of a Mitsubishi MELSEC series PLC.

Digital input: input points 16
Input signal type: switch contact signal or level signal, support ➤positive and negative trigger
Input signal voltage: DC 18~28V
Insulation circuit: optocoupler isolation

Digital output
Output points: 10
Output type: Transistor
Contact capacity: 30VDC/5A, 250VAC/5A
Insulation circuit: mechanical insulation

Analog input
Input points: 2
Input type: voltage/current, DIP switch switch input type
Input range: 0~10V/0~20ma
Conversion accuracy: 12 bits

Analog output
Output points: 2
Output type: voltage, current
Output range: 0~10V/0~20ma
Conversion accuracy: 12 bits

High-speed counter
Input points: 6 channels (X0~X5) single phase, 2 channels AB phase
Pulse frequency: single-phase 4 channels 100K (X0~X3), 2 channels 40K (X4~X5)
Input signal voltage: DC 18~28V

High-speed pulse output
AMX-FX3U-26MT-E
Number of output points: 2 channels (Y0~Y1)
Pulse frequency: 100K per channel

Communication Interface
RS485: 1 channel, support MODBUS RTU, FX3U PLC communication protocol
RS422: 1 channel, supports uploading, downloading, and monitoring
RJ45 1 channel, 10/100Mbps communication rate, support MODBUS TCP, Mitsubishi FX3U built-in TCP/IP protocol

Power Supply
Power supply: DC24V, terminal access; with anti-reverse protection
Power consumption: 2W~4W
Surge protection: 600W

Structure and environment
Size (mm): 129*86*50
Installation method: 35mm DIN rail
Working temperature: 0℃~+50℃ (no freezing)
Working humidity: 10~80%RH (non-condensing)