DVP12SE11R DVP12SE11T Delta New Original DVP SE Series PLC Programmable Logic Controller Ethernet Version



*Program capacity: 16k steps
Data register: 12k words
*Higher execution speed compared to the competition: LD: 0.64μs, MOV: 2μs
*Built-in Ethernet supports MODBUS TCP and Ethernet/IP
*IP Filter function is a firewall that offers the first line of
defense and provides protection from malware and network threats
*Supports DVP-S series left-side and right-side modules
*No battery required. Maintenance-free.
(Real time clock operates for 15 days after power off)




Power supply voltage 24 VDC (-15 to 20%)

(with counter-connection protection on the polarity of DC input power)

DVPPS01/PS02: input 100 to 240 VAC, output 24 VDC/1A (PS02: 2A)

Connector European standard removable terminal block (Pin pitch: 3.5mm)
Operation Maximum power loss time is 10ms or less.
Inrush current Max. 7.5 A@24 VDC, I2t = 0.25 A2S
Fuse capacity 2.5 A/30 VDC, Polyswitch
Power consumption 1.8W 1.5W
Power protection With counter-connection protection on the polarity of DC input power
Insulation resistance > 5 M Ohm (all I/O point-to-ground: 500 VDC)
Noise immunity ESD (IEC 61131-2, IEC 61000-4-2): 8kV Air Discharge

EFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV,

Analog & Communication I/O: 1kV

RS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/m

Grounding The diameter of grounding wire cannot be smaller than the wire

diameter of terminals L and N (All DVP units should be grounded

directly to the ground pole).

Operation / storage Operation: 0 to 55°C (temp.), 50 to 95% (humidity), Pollution degree 2

Storage: -25 to 70°C (temp.), 5 to 95% (humidity)

Vibration / shock resistance International standards: IEC61131-2, IEC 68-2-6 (TEST

Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)

Additional information

Weight N/A



There are no reviews yet.

Be the first to review “DVP12SE11R DVP12SE11T”

Worldwide Free Shipping is guaranteed to global online consumers in AMSAMOTION.STORE. We guarantee total shopping satisfaction by offering exchange, Return or Refund Policy.