ETH-300 ETH-300-2P Module
Ethernet data collection for Siemens S7-200 and 300PLC supports the vast majority of SCADA software in the industrial control field and supports Siemens S7TCP Ethernet protocol and Modbus TCP protocol.
• According to the different models of the extended RS485 touch screen, it is divided into a direct type and a bridge type.
• ETH-300 Direct pass: Extended ports can connect to Siemens and Proface touch screens, multi-station cables, communications board cards, etc.
• ETH-300-2P bridge type: Extended ports can be connected to Weiving, Delta, Kinco, etc.
The ETH-300 and ETH-300-2P are Ethernet communication modules designed for data acquisition of Siemens S7-300 PLC in industrial control applications. They support various SCADA software and communication protocols such as Siemens S7TCP Ethernet and Modbus TCP.
ETH-300 and ETH-300-2P modules provide Ethernet-based data acquisition capabilities for Siemens S7-300 PLC, offering flexibility, compatibility with SCADA software, and support for multiple communication protocols.
Support multi-site communication, the extended port can connect to the touch screen or other main stations
Potter ratio adaptive, supports 9600,19200,187500,500000, 1500,000 Portal baud rate
Support DP and MPI communication modes, and maximize 6 clients support 6 clients
You can perform parameters and run the device through the web server
Support the maximum 1500,000 Potter rate communication, which can meet the needs of large data volume communication
Ethernet communication with Botu programming software
ETH-300 for Ethernet data acquisition of Siemens S7-300 PLC supports most SCADA software in the industrial control field and supports Siemens S7TCP Ethernet protocol and Modbus TCP protocol.
The DB9-pin female port of ETH-300 expansion is a straight-through type, which can be connected to Siemens and Proface touch screens, multi-master cables, communication boards, etc
ETH-300-2P for Ethernet data acquisition of Siemens S7-300 PLC supports most SCADA software in the industrial control field and supports Siemens S7TCP Ethernet protocol and Modbus TCP protocol.
The DB9 pin female port of ETH-300-2P expansion is a bridged type, which can be connected to Siemens, Kunlun Tongshi, Weilentong, Delta, Bucco, USB-PPI programming lines, etc., without occupying the PLC programming port, and has wide practicability.
In addition, ETH-300-2P can communicate with 200PLC without obstacles after changing the module communication mode to PPI mode on the web page.
Note: ETH-300-2P requires that the baud rate of the touch screen be lower than that of the PLC to connect the touch screen, and if it is connected to the Siemens touch screen, the number of client connections cannot be too large. In case of abnormal communication, it is necessary to reduce the number of client connections.
Worldwide Free Shipping is guaranteed to global online consumers in AMSAMOTION.STORE. We guarantee total shopping satisfaction by offering exchange, Return or Refund Policy.