ETH-MPI/DP

Description

The ETH-MPI/DP is a Siemens PLC Ethernet Module for use with the Siemens S7-300 series of programmable logic controllers (PLCs). The Ethernet Module allows the PLC to communicate with other devices over an Ethernet network. It is typically used in industrial automation applications to exchange data with other devices, such as HMI (human-machine interface) panels, sensors, and actuators.

The ETH-MPI/DP Module is compatible with the STEP7 TIA Portal programming software, which is used to program and configure Siemens PLCs. It can be used to replace the CP343-1, CP5611, CP5613, and CP5512 Ethernet modules.

To use the ETH-MPI/DP Ethernet Module, you will need to install it in the PLC and configure it using the STEP7 TIA Portal software. You will need to specify the module’s communication settings, such as its IP address and communication protocol, in order to establish a connection with other devices on the network.

Description:

1. Without adding any program to the PC and the PLC, you can use it immediately after installation.
2.Siemens S7-300 can the MPI / DP protocol conversion for Siemens Profinet protocol (TCP / IP protocol).
3. Achieve long-distance, high-speed (up to 1.5M) communications, and can be connected at the same time Step-7 Siemens S7-300 Programming.
4. Automatic baud rate detection.
5. Realization of cross-regional data transmission over the Internet.
6.Alternative Siemens PC-MPI USB-MPI and CP343-1CP5611, CP5613, CP5512 communications card and Siemens PC adapter programming adapter