$65.00 – $68.00
Designed for industrial automation communication, it is used to extend the distance of RS485 communication equipment in complex and hostile industrial scenarios.
1-way RS485 to 1-way RS485, asynchronous half duplex, two-way communication, data transmission is completely transparent.
Built-in DC-DC power isolation module, isolation voltage 1500V.
The optocoupler isolates the RS485 master-slave network to ensure data communication is not affected by ground loop and common mode voltage difference.
RS485 to RS485 Repeater Manual https://www.amsamotion.store/2022/02/rs485-to-rs485-repeater.html
The AMSAMOTION RS485 Repeater is a device that is used to extend the distance of RS485 communication equipment in industrial environments. RS485 is a widely-used communication standard for serial data transmission, and it is commonly used in industrial automation applications.
The RS485 Repeater is designed to support 1-way RS485 to 1-way RS485 communication, which means that it can transmit data between two devices over a single pair of wires. It is an asynchronous, half-duplex device, which means that it can transmit data in both directions, but only one direction at a time.
The RS485 Repeater has several features that make it suitable for use in industrial environments. It has a built-in DC-DC power isolation module that provides isolation voltage of 1500V, which helps to protect against electrical noise and other interference. It also has optocouplers that isolate the RS485 master-slave network, ensuring that data communication is not affected by ground loop and common mode voltage differences.
Interface standard: EIA / TIA compliant RS485 terminal block
Baud rate: 0 ~ 115200bps (adaptive)
Communication protocol: not restricted by software protocol
Communication distance: only one repeater is used to extend 1200 (at 9600bps)
Cascade: RS485 interface supports maximum 32 nodes (distance between nodes should be ≤10m)
Operating voltage: 9V ~ 24V, active design with anti-reverse connection design
Static Power Consumption: 0.6W
Working temperature: -20 ℃ ~ + 70 ℃
Storage temperature: -40 ℃ ~ + 85 ℃
Relative humidity: 5% ~ 95%
Transmission medium: twisted pair or shielded cable
Installation method: 35mm DIN rail
Application scenario: The RS485 to RS485 repeater is suitable for: industrial automation, power acquisition, security monitoring, building intercom, high-speed toll collection, card access control, PLC, parking system, and other scenarios which need to extend the communication distance under the 485 bus protocol.
With Power, Without Power
Worldwide Free Shipping is guaranteed to global online consumers in AMSAMOTION.STORE. We guarantee total shopping satisfaction by offering exchange, Return or Refund Policy.